The Intrepid Tourer uses threadless style headset which requires a threaded starnut to be installed inside the steerer. This type of headset must be used with a collar that clamps on to the outside of the steerer by means of binder bolts. The collar is further secured by a cap which is bolted to the star nut.

To adjust a headset, the collar must be loosened, then the bolt that runs through the cap to the star nut is tightened. This presses the collar down against the tapered bushing that fits inside the adjustable cup and takes up the slack in the system. They may also compress the rubber centering mount slightly. The collar is then clamped down with the binder bolts to lock in the tension.